Note: Most machines will update automatically on the first sale of the day!

Check out the videos and instructions below:

PAX A80, Aries 8, A35, and A920 terminals will update on the first sale of the day.

For Dejavoo Z11 and Z9 terminals, see below.
Step by Step Instructions:
1). Tap the 3 bars menu on the bottom left of the touchscreen
2). Password “1234” enter
3). Utility
4). Password “1234” enter
5). Settings
6). Select Date/Time
7). Update time
8). Update time in military time
9). Press enter

For QD2 and QD4 terminals, see below.
Step by Step Instructions:
1). Tap the circle icon on the bottom-middle of the screen to return to the home screen.
2). Tap the "Settings" icon.
3). Tap the 3 bars menu at the top right of the screen
4). Scroll down to and select "Date & Time"
5). Update timezone and date/time - if date/time is not selectable, uncheck "automatic date/time" and "use network provided time."

For PAX S300 terminals, see below.
Step by Step Instructions:
1). Press Menu (or press 1 and FUNC at the same time)
2). Enter password – 0000
3). Press the down arrow and then System Settings
4). Press Date/Time Setup
5). Use yellow backspace button to clear out old date and put in new date in MM/DD/YYYY format, then press ENTER
6). Use yellow backspace button to clear out old time and out in new time in military time or 24-hour clock in MM:HH:SS format, then press ENTER
7). Press Cancel until you get back to the main screen

For PAX S920 and PX7 terminals, see below.
Step by Step Instructions:

1). Press Enter and the number 1 at the same time
2). Enter password – 0000 or 1234
3). Press Enter
4). Select System Settings
5). Select Date/Time Set Up
6). Follow the on-screen prompts to change the date and time

For Tetra Desk 3500 terminals, see below.
Step by Step Instructions:
1). Press the grey bullseye button on the right side of the screen
2). Select Admin Mode
3). Enter password – t8432678 (press the “8” key twice to get the lowercase “t”)
4). Select Tetra Admin
5). Select Date/Time
6). Follow the on-screen prompts to change the date and time

For VX 520 terminals, click here.
Step by Step Instructions:
1). Press Enter
2). Choose Setup
3). Enter Password (1, Alpha, Alpha, 6, 6, 8, 3, 1, Enter)
4). More x3 until you see Date/Time
5). Update Date and Time
6). Press Cancel after Date and Time is updated to get back to main screen

For Ingenico ICT 220 terminals, click here.
Step by Step Instructions:
1). F button
2). Password – 1234562F
3). 0 – Telium Manager
4). 3 – Initialization
5). 1 – Parameters
6). Date and Time
7). Update date and time

For Ingenico ICT 250 terminals, click here.
Step by Step Instructions:
1). Press green OK button
2). Manager Password – 1234 Enter
3). Utility
4). Settings
5). Date and Time
6). Update date and time

For FD 130 and FD 150 terminals, click here.
Step by Step Instructions:
1). Choose the wrench/screwdriver
2). Date and Time
3). Enter date and time

For PAX D210 terminals, see below.
Step by Step Instructions:
Press Menu (or press 1 and FUNC at the same time)
Enter password – 0000
Press the down arrow and then System Settings
Press Date/Time Setup
Use yellow backspace button to clear out old date and put in new date in MM/DD/YYYY format, then press ENTER
Use yellow backspace button to clear out old time and out in new time in military time or 24-hour clock in MM:HH:SS format, then press ENTER
Press Cancel until you get back to the main screen

For Pax S80 and S90 terminals, click here.

For VX 510 and 570 terminals, click here.

For VX 520 terminals with MIDs beginning with 444, click here.

If your terminal is not listed here or if you have any questions, please don’t hesitate to reach out to us at 1-855-360-0360.